How To Install ESP32 Board In Arduino IDE
Introduction
Hello everyone welcomes back to “Techno-E-Solution”, in this tutorial we will see how to Install the ESP32 board in Arduino IDE, which helps you to upload code to the ESP32 board using Arduino IDE. Sometimes in Arduino IDE, you did not find an ESP32 board in the board's manager to install, don’t worry I’ll show you how to install the ESP32 board in Arduino IDE in a few steps & in an easy way. If your internet connection is fast then it’ll take a few minutes to install on your PC, So without wasting further time let’s get started.
Watch out the video If reading bores you.
If you got this video helpful then subscribe to our YouTube channel for more such a quick tutorial.
Go Through The Following Steps
1. First, turn on your PC’s internet connection
2. Open Arduino IDE
3. Open Files & go to Preferences
4. Simply copy the following link and paste it into the Additional Boards Manager URLs
( https://dl.espressif.com/dl/package_esp32_index.json )
5. Then click on the OK button.
6.Click on Tools button > Board > Boards Manager
7. In search bar type esp32
8. Select the esp32 by Espressif System
9. Then select the latest version of the board & click on the Install button
It’ll take some time to get installed on your PC. So Take a Cup of tea
After installing the board successfully you can see the ESP32 Arduino board option in the boards.
If you are still confused then visit my YouTube channel for a complete tutorial video.
You can Buy me a coffee If you got this article helpful.
Post a Comment